1 - 10
z
Attach or detach the implement on wide and
level ground.
z
Do not use the tractor in combination with
equipment arbitrary, without having consulted
the specific operator’s manual provided with the
equipment.
z
You have to stay clear from the three-point
linkage when controlling it. Do not stay between
tractor and implement.
z
Do not stay between tractor and trailed vehicle
for connecting/disconnecting or checking it.
Trailed vehicle may roll down or tractor can
move reverse.
z
When towing the trailed vehicle, use only hitch
or drawbar. Do not tow by connecting with any
other structures.
z
When connecting heavy implements, apply the
parking brake and use the wheel chock.
z
Do not attach over-weighted implement.
▶
Before connecting or checking the implement, put PTO switch to “OFF” and place
PTO gear lever(if fitted) in neutral position.
▶
When attaching or detaching the implement, make sure to fix the implement and
tighten the three point hitch pins correctly. If not, the serious troubles and injury can
occur during the operation.
▶
If heavy loaded trailer is connected to 3-point linkage or any structure, it can cause
turnover or failure and serious injury. Make sure to use towing hitch or authorized
draw bar.
Warning
(4) Notices when connecting Implement
▶
When connecting or disconnecting hydraulic coupler, lower implement on the
ground, turn off engine and check if the pressure of hydraulic line is released.
▶
When installing the implement having big hydraulic cylinders or lines, check oil
level in tractor transmission housing after installing the implements.
Caution
