15
Attachment
8
Attachment
8.1
Teach-in of a second dual
drive (optional)
The radio transmitter can operate two
double drives simultaneously (Parallel
function).
After you carried out the teach-in
process for the first double drive, you
carry out the same process for the
second double drive:
•
Press button
L
on the
second double drive for
approx. 1 s.
•
Now press buttons
1
and
2
on the
remote control and keep them
pressed until the back adjustment
motor moves briefly up/down.
•
The teach-in process has been
completed successfully.
This function can only be switched off
by resetting the radio transmitter to its
factory settings (see page 12).
The parallel function will not
synchronize the drives, they will just
move simultaneously. Depending on
the load of each drive, over time there
might show differences of the tilt
angles of the back and leg motors.
In this case use button
1
to move all
drives completely up. After that the
motors should move parallel again.
