LRX
VULTURE
Check for the latest manual updates at www.lrx-lighting.com
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
4
4
Preparing the Arri-360 for mounting:
Remove Arri-360 yoke from fixture, (remove two bolts on each side).
DO NOT REMOVE the Arri-360
TILT LOCK BOLT
(Located at the center of the lever)
Installing the Arri-360 fixture into the Vulture assembly:
Slightly flex Vulture arms inward to allow pins to locate to fixture
mounting pins. Watch your fingers; the spring back may create a crushing
hazard!!
Install the four retaining pins.
Install safety cables as required.
Test the range of motion.
Please Note: Mounting options for other fixtures and linear tubes are available.
Uninstalling the fixture and placing into the shipping case:
Remove accessories from Vulture and place them in their storage location.
Use the homing feature to park the Vulture; or use hand controller to rotate the
output arms to vertical and then rotate the hanger assembly parallel to base.
NOTE:
The Vulture will swing forward when the ratchet straps are released;
ensure no personnel are in front of the unit.
Lower the Vulture into shipping frame and secure the ratchet strap.
