LRS T7400A User Manual Download Page 39

Page: 39 / 40

Using Non-Alpha Guest Pagers

Programming

To program the Guest Pagers, refer to pg. 23

Charging

Any rechargeable guest pager will require use of an LRS charger.

1. Place the guest pager in the charger. For 15 Coasters, 10 Pizza pager, and 10 Lobster call pagers.

Do not stack more than 10 pagers at a time on a Charger.

2. Allow unit to charge fully overnight.

3. Remove from charger, and pager will vibrate, beep, and light all lights as a verification that it is

working

4. Replace the pager in the charger at the end of each day.

The pagers all use different chargers:

• Coasters use the Charger 8 (CH-R8)

• AdverTeasers and Star Pagers use the Charger 9 (CH-R9)

• Lobster Pagers use the Lobster Charger (CH-LP)

• Pizza Pagers use the Pizza Charger (CH-PZ)

Using Alpha Coaster Guest Pagers

Programming

To program the Alpha Guest Pagers, refer to pg. 24

Charging

Any Alpha Coaster pager will require use of an LRS coaster charger.

1. Place the pager in the charger. 15 pagers at a time on a Charger.

2. Allow unit to charge fully overnight.

3. Remove from charger, and pager will vibrate, beep, and light all lights as a verification that it is

working

4. Replace the pager in the charger at the end of each day.

• The Alpha Coasters use the Charger 8 (CH-R8)

Long Range Systems

T7400A User Manual

Summary of Contents for T7400A









































Search results

Summary of Contents for T7400A

Reviews:

Related manuals for T7400A

Brands by name

Popular brands

LRS T7400A, User Manual

Search results

Summary of Contents for T7400A

Reviews:

Related manuals for T7400A

Brands by name

Popular brands