FEATURE SETUP PROCEDURES
User’s Access Code
Many of the functions that adjust paging preferences are protected by an access code
• To reduce tampering with critical settings, the keypad is password protected.
• The access code 56789 allows you to enter most restricted programming screens.
• Press F4 at any menu to return to the Guest menu.
Set Page Mode
This programs how guest and staff pagers will respond when paged. Guest pagers can flash, beep, glow,
flash and beep, etc. All page modes are staff programmable and do not require an authorization code. To
set the modes:
1. Press SETUP.
2. Select 1 (1: Set Page Mode)
3. Select 1 (1: Guest Pager) or (2: Manager Pager)
Guest Pager - Select:
1 (1: Flash) sets how long the pager flashes before shutting off.
• Choose 1 (1 Sec.), 2 (30 Sec.), 3 (Cont) or 4 (Beep) (Default is 30 seconds)
• Select vibration mode F1 (ON), F2 (OFF), F4 (EXIT)
2 (2: Beep Only) sets how many times the pager beeps before shutting off
• Choose 1 (Beep 3 Times), 2 (Beep Cont) and Press ENTER
• Adjust beep volume (Loud/Quiet) level F1 (UP), F2 (DN), F3 (HELP), F4 (EXIT)
• Select vibration mode F1 (ON), F2 (OFF), F4 (EXIT)
3 (3: Glow) sets how long the pager will glow before shutting off
• Choose 1 (Glow 15 Times), 2 (Glow 5 Minutes)
• Select vibration mode F1 (ON), F2 (OFF), F4 (EXIT)
Manager Pager (Non Alpha only) - Select:
1 (1: Vibrate) set the number of vibrations for the pager
• Choose 1 (Vib 1), 2 (Vib 2), 3 (Vib 3) (Default is 3)
2 (2: Beep) set how the pager will beep before shutting off
• Choose 1 (Beep 3 Times), 2 (Beep Cont) 3 (Look Down Mode) [look down requires a pager reset]
• Adjust beep volume (Loud/Quiet) level F1 (UP), F2 (DN), F3 (HELP), F4 (EXIT)
3 (3: Both) set the number of times the pager will beep and vibrate before shutting off
• Choose 1 (Vib/Beep 1), 2 (Vib/Beep 2), 3 (Vib/Beep 3)
• Adjust beep volume (Loud/Quiet) level F1 (UP), F2 (DN), F3 (HELP), F4 (EXIT)
Long Range Systems
14
T7400A User Manual
