background image

USER MANUAL 

 |  

Butler II

LRSUS.COM   |   15

serviced by someone other than LRS.  
Disclaimers.  LRS HEREBY DISCLAIMS ALL IMPLIED WARRANTIES CONCERNING THE DE-

LIVERABLES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, ANY IMPLIED 

WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, OR ANY IMPLIED WARRANTY OF 

NON-INFRINGEMENT. PURCHASER ACCEPTS 
THE DELIVERABLES “AS IS,” EXCEPT FOR THE EXPRESS LIMITED WARRANTY MADE HERE-

IN.
Limitation of Remedies.  In the event of any breach of any express warranty made herein, 

LRS may at its option repair or replace any defective Deliverable or refund the money that 

Purchaser paid for it. LRS’s total liability for any defect in any Deliverable or for any other 

breach of any of its duties and obligations to Purchaser shall be limited to the amount of 

money that was paid for the defective Deliverable or the other duty or obligation. LRS will 

in no event be liable for any lost profit or any other type of consequential damage.
Confidentiality.  The Deliverables and all computer systems that deliver any portion of 

them contain confidential trade secret information. Purchaser shall not attempt to reverse 

engineer any portion of the Deliverables or such computer systems, such as to decompile 

any portion of the Software, nor aid anyone else in doing so. 
Intellectual Property.  No portion of any intellectual property right in the Deliverables is 

being transferred to the Purchaser or to its customers. Purchaser may not copy or modify 

any portion of the Deliverables, nor permit or aid anyone else in doing so. Notwithstand-

ing, Purchaser may use the Deliverables as they are intended to be used, as expressed in 

written materials published by LRS. 
Operational Authority and Licensing Requirements.  Non-Federal government Purchas-

ers may operate the Deliverables within the United States under the licensing authority 

issued to LRS by the Federal Communications Commission (FCC), provided, however, that 

such operation is: (a) subject to LRS’s control, (b) conducted on a non-profit, cost shared 

basis with costs apportioned as part of the price for such Deliverable, (c) in accordance 

method of operation set forth in the manual for the deliverable, available for download at  

http://lrsus.com/support  and (d) limited to the term of this Agreement, the term of LRS’s 

authority, or a term otherwise specified by LRS, whichever expires earlier.  Notwithstand-

ing the provision below entitled “No Third Party Beneficiary,” users of any Deliverables 

acquired from Purchasers or other entities may contact LRS to determine if they may be 

eligible to operate under LRS’s authority. Alternatively, Purchasers and users may obtain 

their own licensing authority; the FCC posts a list of licensing coordinators at http://wire-

less.fcc.gov/services/index.htm?job=licensing_3&id=industrial_business. Purchasers and 

eligible users of any Deliverable agree to abide by and strictly adhere to any rules, regula-

tions and guidelines, including the FCC’s rules, governing the operation of the Deliverable. 

Changes or modifications to any portion of any Deliverable may void the Purchaser’s or 

user’s authority to operate the Deliverable and should not be made without the express 

approval of LRS. Moreover, use of any portion of any Deliverable outside the United 

States is subject to the rules and regulations of other countries and may be prohibited. 

Use of any Deliverable constitutes Purchaser’s and user’s acceptance of and agreement to 

Summary of Contents for Butler II TX-1605-5




















Reviews: