USER MANUAL
|
Butler II
LRSUS.COM | 3
PROGRAMMING THE BUTLER II
The Butler II with 5 buttons and single external input can be programmed to page up to
six different pager numbers (or any number of pagers with the same number).
Install Programmer
Butler II Programming
1. Find the software and download it from lrsus.com/downloads.
2. Launch the Butler 2 application found under the Windows Start menu.
Note: An alert might appear from windows. [Click on more info and Run anyway]
There will be 2 residual folders on the desktop, these are not needed anymore, and can
deleted.
Connecting the Butler II
NOTE: Remove all batteries from the Butler II before connecting to the computer.
The computer will not detect the Butler II properly if batteries are still in when the Butler
II is connected to the PC. Push the ridged button on the top end of the Butler II to remove
the cover.
You may insert batteries AFTER the Butler II is connected to the PC.
1. Open the Butler II programmer (double click on the Icon).
2. Connect the USB cable from the PC to the Butler II.
