USER MANUAL
|
Butler II
LRSUS.COM | 8
Repaging Enable
This feature will enable or disable resending pages when the button is pressed.
NOTE: Acknowledge Page must be enabled for this feature to work. To set:
1. Click on Enabled box to enable or disable (a check mark indicates input is enabled).
2. Enter a repage time. Must be 10 seconds or more.
3. Press Update Butler when done.
Acknowledge Page
When used, the acknowledge button will send a message to management indicating the
time between an alarm (or other input) and staff response. It also cancels the re-page.
This button is located on the side of the Butler II. To Set:
1. Enable the function.
2. Enter the pager that will be paged and the message that will be displayed.
3. Press Update Butler when done.
To Use: When a button is pressed the page will repeat at the selected interval until the
acknowledge button is pressed (located on the side of the Butler II) or a magnet is run
near the acknowledge button
