Protect Switch 400V motors
Version:
3.0 | 14.02.2021
instruction manual | 1162723-00000
page
4
from
29
1
Conventions for presentation (Symbols used and warning notices)
This document may contain various warning words and warning symbols that indicate potential hazards:
Important:
This symbol makes the reader aware of important information.
Caution!
This symbol warns of a possible fault. If this is not followed, the unit or systems and equipment
connected to it may be disrupted or even fail completely.
Warning!
This symbol warns about a hazard. If this message is not followed, there is a threat that people may be
injured or even killed or property may be damaged or destroyed.
1.1
Abbreviations (glossary)
Abbreviation
Description
AS-i
AS-Interface (Actuator Sensor Interface)
SaW
Safety at Work, AS-i safety technology
MG
Module housing
2
General
Please read through all the documentation provided carefully and in full before you use the unit.
Always follow the instructions, information and warnings contained in this documentation and note the
technical specifications.
Make sure that all the documents are kept in a legible state and in a suitable place so that they can be
consulted again at a later date.
2.1
Functions of this document
These operating instructions provide the technical staff from the machine manufacturer/machine operator or
plant manufacturer/plant operator with information on safe installation, electrical installation, configuration
and parametrization as well as how to operate and maintain the function.
2.2
Target group
The operating instructions are aimed at the planners, developers and operators of the plants that are
supposed to be kept safe by one or more modules. These instructions are also intended for people who
integrate the functions into a machine, start it up for the first time or maintain it.