Protect Switch 400V motors
Version:
3.0 | 14.02.2021
instruction manual | 1162723-00000
page
14
from
29
5.1.2.2
Setting parameters via the ASIMON360
5.1.2.2.1 Setting the clockwise/anti-clockwise function as a function of the OUT1/2 outputs
So that clockwise and counter-clockwise can be switched via the control independently of releasing the
safety function, the appropriate P.0 diagnostic flag must be set to 0 (Default value = 1).
The setting is only made via the ASIMON360 safety software in the hardware configuration of the
corresponding AS-i node, in this function of the BWU2173 safe node from B+W.
In order to be able to make this setting, the tick must be placed in the box next to "Show advanced settings".
Once this option is chosen, the additional "Option" tab is displayed.
The "Sa
fe outputs need an additional …….." option must be ticked on the tab page so that clockwise/anti-
clockwise can be selected independently of the release.
5.1.2.2.2
Setting Y.3 as a standard input for the „manual mode…“ function
The setting is made in the "Standard I/O" tab. Here the input 1.Y1 must be configured to the value "Standard
Input" (optional with knob-operated control).