LPKF ProtoMat S103, Manual

Page: 93 / 105

ProtoMat S Storage
©
2011 LPKF AG HB V0.9/Mrz-11 91
9
Pos: 34 /ED_Technische_Dokumentation/2_Bedienungsanleitung/Maschine/RP_Fräsbohrplotter/ProtoMat_S_Serie/ProtoMat_S_Serie_IIG/Kapitel_9_Lagerung/9_1_Außer_Betrieb_nehmen @ 0\mod_1254831435051_2058.docx @ 3650 @ 1223
9 Storage
This chapter describes the storage of the circuit board plotter.
9.1 Shutdown
Before storage set the circuit board plotter out of operation.
■
Disassembly of the circuit board plotter
1. Switch off the circuit board plotter and the dust extraction.
2. Unplug the mains cable from the electrical safety socket.
3. Remove the tube from the dust extraction.
4. Remove the connection cable from the dust extraction.
5. Remove the USB cable from the PC.
6. Open the hood and remove the mains cable.
7. Install the transport locks.
8. Place all the connection cables on the working table and close the hood.
♦
Now the circuit board plotter is disassembled.
Note
The PC and the dust extraction have to be disassembled
accordingly. The systems can be used for other machines or they
can be stored as well. The appropriate information concerning
disassembly and storage can be found in the respective operation
manuals.
9.2 Storage
Note
The circuit board plotter has to be stored in the covering box in a
cool and dry location.
ATTENTION
Risk of injury!
The machine is heavy and bulky and cannot be transported or
lifted by one person!
Lift and transport the machine always with two persons.
■
Packaging the circuit board plotter
1. Place the covering box besides the work desk.
2. Open the box cover and take the unpacking instruction.
3. Follow the unpacking instruction step by step in reverse direction.
♦
Now the circuit board plotter is packed.