LPKF ProtoMat S103, Manual

Page: 104 / 105

Appendix ProtoMat S
102 HB V0.9/Mrz-11
©
2011 LPKF AG
10
labour protection regulation 23
labour protection regulations 23
Lamination 97
lift truck 42, 92
LPKF port 27
LPKF service 10, 23, 32, 33, 89
LPKF-Service 87
machine 21, 23, 41
machine Interfaces 27
Machine type 10
machining phase 56
machining process 50, 56
machining remains 23
main switch 48
mains cable 42, 44, 89, 91
Mains frequency 10
mains power supply 23, 33
maintenance 33
maintenance set 10
manual drilling 47
manual milling 47
manufacturer 14, 16, 18
Manufacturer 13
maschine 39, 42, 91
material dust 37
measuring microscope 68, 70
Measuring microscope 11
menu bar 50
mill/drill head 21, 28, 39, 53, 54, 55, 57,
58, 61, 65, 66, 67, 68, 72, 86, 89, 90
milling depth 68
Milling depth adjustment 29
Milling depth limiter 90
milling tool 68
milling track 11, 68
Monitor 11
motor 65
Motor 58
motor speed 9
moving speed 9
Multi layer 73
multilayer 25, 32
Multilayer 25, 97
noise level 37
Objective 31
operating hours 90
Operating voltage 10
operation 33
operation mode switch 45
OS 45
password 45, 48
pause position 57, 61
PC 41, 42, 44, 45, 85, 86
PCB 73
PCB material 66, 71
permanent acoustic noise level 37
polyoxymethylen 32
Power cable 10
Power consumption 10
power supply 87
Prepreg 97
Pressure meter 28
printed circuit board 25
processing material 37
production data 74
production material 61
production phase 47
production process 75
project 76
project file 82
protective clothing 23, 37
protective glove 65, 73
protective gloves 68
ProtoMat S 10
RAM 11
reference hole 61
reference hole drill 10
reference hole pivot 10, 61
reference hole pivots 10
reference hole stripe 10
reference position 57
repair 23
Resist 97
resolution 9
Respirator mask 37
rest material 37
ring light 31
RS232 cable 44
Rubout area 97
safety glasses 37
safety gloves 22, 37
safety zone 41
scope of delivery 10
Screen resolution 11