LPKF ProtoMat S103, Manual

Page: 92 / 105

Maintenance/servicing ProtoMat S
90 HB V0.9/Mrz-11
©
2011 LPKF AG
8
Pos: 33 /ED_Technische_Dokumentation/2_Bedienungsanleitung/Maschine/RP_Fräsbohrplotter/ProtoMat_S_Serie/ProtoMat_S_Serie_IIG/Kapitel_8_Instandhaltung_Wartung/8_2_Wartung @ 0\mod_1254838907429_2058.docx @ 3656 @ 2
8.2 Maintenance
For proper function of the circuit board plotter maintenance activities have to be
carried out in certain intervals.
ATTENTION
Risk of injury!
Unintended starting of the motor and moving of the mill/drill
head during repairs or maintenance may cause severe injuries.
Make sure that only one person operates the machine. Protect
the machine against unauthorised usage during maintenance
and repair activities.
ATTENTION
Risk of injury!
The opened hood of the soundproof housing may shutdown and
crush finger or the whole hand.
Open the hood of the soundproof housing always up to the
latching position and protect the machine against shocks.
Tab. 15:
Maintenance and
service plan Component Interval/Control Maintenance activity
Milling depth limiter after 100 operating
hours cleaning
Chucks after 100 operating
hours cleaning
Tool position Tool is not put down
correctly Configure tool position
Dust extraction Extraction power
decreases perceptible Exchange fine particle filter