LPKF ProtoMat S103 Manual Download

Page: 83 / 105

ProtoMat S

Operation

2011

LPKF AG

HB V0.9/Mrz-11

6.9.1 Mount dispense set

Note

Keep the solder paste stored in a cool place until consumption.
Before starting the dispense process the solder paste must be
warmed up to room temperature.

Note

The installation of the dispense set will be guided by an intuitive
wizard. Start the installation of the dispense set when requested
by the wizard.

■

Assembling the dispense set

Fig. 54: Dispense
adapter

Take the dispense adapter and loosen the upper fastening nut /3/. Pull
out the empty cartridge.

Take the empty cartridge and unscrew the dispensing tip.

Take the solder paste cartridge and unscrew the lower end cap. Screw
the dispensing tip on the outlet opening of the solder paste cartridge.

Insert the solder paste cartridge into the dispense adapter and tighten the
upper fastening nut carefully.

Fig. 55: Installed
dispense set

Summary of Contents for ProtoMat S103










































































































Search results

Summary of Contents for ProtoMat S103

Reviews:

Related manuals for ProtoMat S103

Brands by name

Popular brands

LPKF ProtoMat S103, Manual

Search results

Summary of Contents for ProtoMat S103

Reviews:

Related manuals for ProtoMat S103

Brands by name

Popular brands