Appendix
ProtoMat C30/C30-S
53
› After lubricating the 4 carriage guide wipers you must plug in and
mount the cover.
13.2.2 Carriage guide wipers of the X-axis
The wipers (4 in total) are located on both sides of the carriage both in
front of and behind the guide cheeks.
A hole has been drilled on the left and right of the guide rail cover to
allow access these wipers.
fig. 36:
13.2.3 Oiling the rear wipers
› Move the carriage to the tool change position.
The supply ports are now behind the guide wall. Use the syringe to
inject oil through the port and into the hole on both sides of the wiper.
1-
tool carriage
2
- Machine base plate
3
- cover for guide rails
4
- supply port
1
2
3
4
Summary of Contents for ProtoMat C 30-S
Page 72: ...Index 72 ProtoMat C30 C30 S...
