LPKF MultiPress S Operating Manual Download Page 11

Page: 11 / 76

Safety regulations

MultiPress S

Operating manual 3.0

Rev 3.6.2009

• Risk of fire!

Position machine such that at least 15 cm of free space are
available on all sides.

Do not deposit any objects on or under the machine.

Make sure that no objects can fall into the machine.

Deposit hot materials only on incombustible surfaces.

• Risk of burns!

When inserting and removing the multilayer from the press,
wear heat-resistant gloves.

• Health hazard!

Hydraulic fluid can cause skin and eye injury. During
maintenance and cleaning work, wear protective gloves.

• Environmental hazard!

Hydraulic fluid is environmentally hazardous.

Collect/absorb spilt hydraulic oil and dispose of it properly.

General safety instructions (continued)

(Table page 2 of 2)

Summary of Contents for MultiPress S













































































Search results

Summary of Contents for MultiPress S

Reviews:

Related manuals for MultiPress S

Brands by name

Popular brands

LPKF MultiPress S, Operating Manual

Search results

Summary of Contents for MultiPress S

Reviews:

Related manuals for MultiPress S

Brands by name

Popular brands