Warnings & Cautions
NOTE: IN THE INTERESTS OF SAFETY, PLEASE READ THESE INSTRUCTIONS
BEFORE INSTALLATION AND USE.
WARNINGS:
ALL ELECTRICAL INSTALLATION WORK MUST BE CONDUCTED BY A LICENSED
ELECTRICAL CONTRACTOR ACCORDING TO THE RELEVANT AUSTRALIAN
STANDARD. DISCONNECT POWER BEFORE INSTALLATION OR SERVICING. NO
USER SERVICEABLE PARTS
RISK OF BURN INJURY - During and after operating unit may be hot, always ensure
that unit has been allowed to cool prior to touching or moving.
•
No user serviceable parts inside - risk of electrical shock.
•
Failure to follow these instructions can result in serious injury, electric shock or death.
•
Always isolate the mains supply prior to conducting any electrical work.
•
Disconnect the power supply when conducting any maintenance or cleaning.
•
Always take care when installing at height.
Specifications
120 & 160W
Wattage: 120W, 160W
Efficacy: 150lm/W
CCT: 5000K
Beam Angle: 90°
CRI: >70
Driver: Meanwell HBG
LED: Nichia
Voltage: 100-240V 50Hz
Power Factor: >0.92
IP Rating: IP65
IK Rating: IK08
Operating Temperature: -30°C to + 50°C
Dimming: Not Available
Installation Instructions
CAUTION: When installing at height, ensure to follow all required safe installation
practices. Prior to installation ensure that the power is disconnected at the mains to
prevent shock or injury.
1. Unpack LED Highbay and discard packaging thoughtfully.
2. Select installation location.
3.
Attach mounting hook, chain or mounting kit (not included) to mounting location,
ensure that mount or chain is of adequate weight rating to support highbay.
4. Ensure that Stainless Steel mounting ring is securely screwed into the threaded
socket on the top of the LED Highbay. Tighten using a tool.
5. Mount highbay using a weight rated spring-lock clip as per (1) above. Ensure that
spring-lock clip is fully closed and that highbay is secure.
6. Connect the highbay input cable to pre-wired socket outlet. Ensure that any loose
or excess mains cable is secured by cable tie and cannot hang down loose across
the body of the highbay fitting.
NOTE: Ensure that highbay is installed in a position with adequate ventilation and
away from dust build-up. If dust is present, a regular maintenance routine should be
implemented to prevent overheating.
1.
2.
1.
2.
1.
2.
1.
2.
