LP Morgan HER20FLIPML, User Manual, Page: 27 / 36

installation instructions | 27
Projector
Installation
Connect Skyhook to Projector. Fit the
16mm spacer under the lowest arm,
the 19mm under the next arm & so on.
If the projector base is uneven, you may
use combinations of spacers & arms to
ensure the triangular plate is horizontal.
Do not tighten any bolts yet.
Flipper Skyhook unit
Move the position of the triangular
plate over the centre of the projector,
with the edge with the 2 holes towards
the front.
Tighten the mounting bolts. The
projector and skyhook system is ready
to be inserted into the Flipper.
²
±
É
Ê
16mm
19mm
22mm
25mm
Æ
Front of projector