LP Morgan HER20FLIPML, User Manual, Page: 14 / 36

14 | installation instructions
Mechanical
Installation
Mechanical Installation
The Flipper may be installed through its own hole if required.
The first crucial step, like any projector installation, is to determine where to put
the Flipper in the ceiling. The Flipper should be installed so that the projector
lens is centered horizontally to the screen, and the distance from the screen
depends on the projector’s throw distance.
Work out the maximum and minimum throw distances for the projector and
place the Flipper somewhere in between. It is better for the projector to be
closer to the screen, but don’t place it at an extreme—leave yourself some
room to adjust the zoom in either direction.
Screen
Screen center
Lens center
Projector center
Note: when aligning the Flipper
make sure that the projector
lens is centered on the screen,
which is not necessarily the
projector center.
Throw Distance