LP Morgan HER20FLIPML, User Manual, Page: 23 / 36

installation instructions | 23
Electrical
Installation
We supply the dry contacts on these units pre-programmed to operate via
a maintained SPST switch (like a normal light switch).
The supplied switch
should be connected to the “Up” and “Common” terminals.
Should you wish to use a different sort of switching method (eg SPDT), you can
easily program the device to do so. However, you will need a receiver eye and
special programming remote (available as our Installer’s Kit - LPM43INSKIT)
Use a small flat
screwdriver to prise
open the motor and
mains terminals
Wiring Diagram
Motor Blue
Motor Brown
24V Positive
24V Negative
FUSE
EYE
JACK
AUX
JACK
Switch Common
Switch Up
Channel 1
Channel 2
Channel 3
All Channels
Switch Down
(Not used
in standard
configuration)