L-INX/L-GATE User Manual
57
LOYTEC
LOYTEC electronics GmbH
2.
L-INX Configurator. This software is required to configure the L-INX device to provide
the necessary data points to the PLC and integrate the device into the network.
3.
logiCAD license for using logiCAD on the PC. The license is available as a softlock
version or as a hardlock version with a USB dongle. On virtual machines it is mandatory
to use the hardlock license.
A detailed guide on how to install the software components described above and upgrade of
an older license can be found in Section 8.2.
To Start a logiCAD Project
1.
After installing the necessary software components start logiCAD from the L-INX
Configurator by clicking the
Start LogiCAD
speed button.
2.
The project wizard starts automatically as shown in Figure 38.
Figure 38: logiCAD project wizard
3.
Select Create new project and press
Next
.