Lowrance Lowrance iFINDER H2O C Page 76 Operation Instructions Manual Download

Page: 76 / 132

To set Com Port Configuration:

1. Press

MENU

↓

YSTEM

ETUP

ENT

2. Press

↓

OMMUNICATIONS

ORT

ENT

3. Use the

↓

↑

keys to select the desired Baud Rate and press

ENT

Configure NMEA

You can configure the unit to use specific NMEA sentences.

2. From the Communications Port menu, press

↓

ONFIGURE

NMEA

ENT

3. A menu appears showing the prefixes of the available NMEA sen-
tences. A check mark next to a prefix means the prefix is in use. Use

↑

↓

→

←

to select a prefix, then press

ENT

to turn the prefix on or off.

Communication Port menu (left) with Configure NMEA menu (right).

NOTE:

The names of the NMEA sentences are abbreviated in this menu.
These are the functions of the various selectable prefixes:

•

GLL transmits latitude and longitude of present position, time of

position fix, and status.

•

RMC and RMB transmits navigation information messages.

•

APB transmits autopilot information.

•

GGA transmits time, position, and fix related data.

•

GSA and GSV transmits fix mode, DOP values, and satellites in

view information.

4. When the desired prefixes are checked or unchecked, press

EXIT

re-

peatedly to return to the previous page.

Use WAAS/EGNOS

The iFINDER H2Oc has a new feature that allows users to turn WAAS
and EGNOS reception on and off. The default value is on. EGNOS
(European Geostationary Navigation Overlay Service) is the European

Summary of Contents for Lowrance iFINDER H2O C




































































































































Search results

Summary of Contents for Lowrance iFINDER H2O C

Reviews:

Related manuals for Lowrance iFINDER H2O C

Brands by name

Popular brands

Lowrance Lowrance iFINDER H2O C, Operation Instructions Manual

Search results

Summary of Contents for Lowrance iFINDER H2O C

Reviews:

Related manuals for Lowrance iFINDER H2O C

Brands by name

Popular brands