Lowrance Lowrance iFINDER H2O C Page 23 Operation Instructions Manual Download

Page: 23 / 132

To remove an MMC

1. Remove battery compartment cover.

2. Remove batteries, if present.

3. Hold unit facedown in right hand. Use your thumb or index finger
and press down on the center of the MMC label.

Remove an MMC Card.

4. Drag the MMC from the slot into the battery compartment.

5. Turn the iFINDER face up and give it a shake to dump the MMC
into your hand or onto a work surface.

To add an MMC or SDC

1. Remove battery compartment cover.

2. Remove batteries, if present.

3. Hold unit facedown in right hand. Drop the MMC card into the slot,
label-up, with the notched edge toward the right.

4. Press down on the center of the label and slide the card to the right.

Add an MMC Card.

5. Turn the plastic rotating card lock until it holds the card firmly in
place with the grip parallel to the direction of the batteries.

6. Replace the batteries and battery cover.

Summary of Contents for Lowrance iFINDER H2O C




































































































































Search results

Summary of Contents for Lowrance iFINDER H2O C

Reviews:

Related manuals for Lowrance iFINDER H2O C

Brands by name

Popular brands

Lowrance Lowrance iFINDER H2O C, Operation Instructions Manual

Search results

Summary of Contents for Lowrance iFINDER H2O C

Reviews:

Related manuals for Lowrance iFINDER H2O C

Brands by name

Popular brands