Lowrance Link-8 VHF User Manual Download Page 42

Page: 42 / 88

5-9 DSC Test Reply (TEST REPLY)

You can respond to incoming DSC TEST calls with an automatic response or with a manual
response.

•

MANUAL

manual response is required, press ENT to confirm or press EXIT to cancel.

•

AUTO

automatically replies after a 10 second delay with an ACK to any incoming

DSC TEST call.

DSC SETUP

LL REPLY

▲

AUTO SWITC

►

TEST REPLY

TIMEOUT

TEST REPLY

►

AUTO

MANUAL

5-10 Set the inactivity timer (TIMEOUT)

You can set the inactivity timer with the following options:

•

AUTOMATED

you can set the inactivity timer to automatically timeout after a

period of inactivity for the following two categories: NON-DISTRESS or
DISTRESS.
Timeout options are:
DISTRESS: NO TIMEOUT; 5 MINS; 10 MINS (default is NO TIMEOUT)
NON-DISTR: NO TIMEOUT; 10 MINS; 15 MINS (default is 15 MINS)

•

NON AUTO

you can set the inactivity timer to exit any non-automated procedure

activity.
Timeout options are:
NO TIMEOUT; 10 MINS; 15 MINS (default is 10 MINS)

Note:

If NO TIMEOUT is selected, then you must press the EXIT key to exit the procedure.

Example:

to set a 10 minute TIMEOUT for non-automated functions:

Select TIMEOUT, then select NON AUTO

Select desired timeout period: NO TIMEOUT, 10 MINS or 15 MINS

NON AUTO

NO TIMEOUT

►

10 MINS

15 MINS

TIMEOUT

►

AUTOMATED

NON AUTO

DSC SETUP

LL REPLY

▲

AUTO SWITC

TEST REPLY

►

TIMEOUT

In this example, 10 MINS has been selected, meaning the radio will exit any non-automated
procedure after a period of 10 minutes of non-activity.

Lowrance - Link-8 Operation Instructions

Summary of Contents for Link-8 VHF

























































































Search results

Summary of Contents for Link-8 VHF

Reviews:

Related manuals for Link-8 VHF

Brands by name

Popular brands

Lowrance Link-8 VHF, User Manual

Search results

Summary of Contents for Link-8 VHF

Reviews:

Related manuals for Link-8 VHF

Brands by name

Popular brands