background image

16

How to Obtain Service - U.S.A. Only

We back your investment in quality products with quick, expert service
and genuine Lowrance

®

 replacement parts.  If you're in the United States

and you have questions, please contact the Factory Customer Service
Department using our toll-free number listed below. You must send the
unit to the factory for warranty service or repair. Please call the factory
before sending the unit. You will be asked for your unit's serial number.
Use the following toll-free number:

800-324-1356

Your unit is covered by a full one-year warranty. (See inside this manual
for complete warranty details.) If your unit fails and the failure is not cov-
ered by the original warranty, Lowrance has a flat-rate repair policy that
covers your unit and accessories packed with the unit at the factory. There
is a 180-day warranty on all non-warranty repairs from the factory, which
is similar to the original warranty, but is for 180 days rather than one year.
For further details, please call us at the above number.

Remember, non-warranty repairs are subject to Lowrance's published flat-
rate charges and 180-day warranty.

LITHO IN U.S.A.

988-0147-11

Lowrance Electronics may find it necessary to change or end our ship-
ping policies, regulations, and special offers at any time. We reserve the
right to do so without notice.

Summary of Contents for LGC-12S

















Reviews: