Lowrance iFINDER, Operation Instructions Manual

Page: 44 / 124

38
NOTE:
"Clear sky" means open sky, unobstructed by terrain, dense foliage
or structures. Clouds do not restrict GPS signal reception.
If for some reason satellite acquisition takes longer, you may be inside
a structure or vehicle or in terrain that is blocking signal reception. To
correct this, be sure you are positioned so that the unit has as clear a
view of the sky as possible, then turn the unit off and back on again.
Find Distance From Current
Position To Another Location
1. While on the Map page press:
MENU
|
↓
to
F
IND
D
ISTANCE
|
ENT
.
2. Center your cursor over the position you want to find the distance to.
A rubber band line appears, connecting your current position to the
cursor's location. The distance along that line will appear in the lower
left-hand corner of the screen.
3. Press
EXIT
to return to regular operation.
The distance to Dallas from the starting point is 211.1 miles.
Find Distance From Point to Point
You can also measure distance between two other points on the map.
1. While on the Map page press:
MENU
|
↓
to
F
IND
D
ISTANCE
|
ENT
.
2. Center your cursor over the first position. (A rubber band line ap-
pears, connecting your
current
position to the cursor's location.) Press
ENT
to set the first point, and the rubber band line disappears.
3. Move the cursor to the second position. The rubber band line reap-
pears, connecting the first point you set to the cursor. The distance
along that line will appear in the lower left-hand corner of the screen.
4. Press
EXIT
to clear the command and return to the page screen.