Lowrance iFINDER Operation Instructions Manual Download Page 23

Page: 23 / 124

The Main Menu.

The Main Menu commands and their functions are:

Screen

command: changes the contrast or brightness of the display

screen as well as the backlight delay.

Sounds

command: enables or disables the sounds for key strokes and

alarms, sets the alarm style and controls speaker volume.

Alarms

command turns GPS alarms on or off and changes alarm

thresholds.

Route Planning

command lets you plan, view or navigate a route.

My Trails

command: shows, creates and deletes trails. You can control

how trails are recorded and you can navigate trails forward and back-
ward with this command.

Cancel Navigation

command: turns off the navigation command after

you have reached the end of a back trail or your destination waypoint,
Point of Interest or map cursor location.

GPS Setup

command sets the GPS receiver options.

System Setup

command sets general configuration options.

Utilities

command lets you access a Sun/Moon rise and set calculator,

a trip calculator, an alarm clock and other timers.

Browse MMC Files

command gives you information about the in-

stalled MMC card and the files it contains.

Summary of Contents for iFINDER




























































































































Search results

Summary of Contents for iFINDER

Reviews:

Related manuals for iFINDER

Brands by name

Popular brands

Lowrance iFINDER, Operation Instructions Manual

Search results

Summary of Contents for iFINDER

Reviews:

Related manuals for iFINDER

Brands by name

Popular brands