88
Settings
Water Speed Averaging
Averages water speed by measuring your speed at a selected interval. Water speed
intervals range from one to 30 seconds. If you select five seconds, your water speed
will be recorded every five seconds, then averaged.
To select a Water Averaging interval :
Highlight the
1.
Water Speed Averaging
box
on the Installation menu.
Press the keypad left/right to select the desired interval.
2.
Highlight
3.
OK
and press
enTeR
.
Temperature Calibration
When there are differences in temperature data,
Temperature Calibration calibrates data from one
temperature sensor with date from another temperature
source. That ensures the accuracy of temperature data
from the selected temperature sensor.
To calibrate Temperature:
Select the
1.
Temperature Calibration
text box from the Installation
menu and press
enTeR
. The Water Temperature Calibration dialog
box will appear.
Use the arrow keys to enter the percentage difference between
2.
temperature sources. Select
OK
and press
enTeR
.
Temperature Averaging
Averages temperature by measuring temperature
data at a selected interval. Temperature intervals
range from one to 30 seconds.
If you select five seconds, your temperature will be averaged using measurements
taken every five seconds.
NOTE:
If the temperature sensor is reading a lower
temperature than the other temperature source, you will input a
positive (+) percentage. Conversely, a negative (–) percentage
will be entered if the temperature sensor is reading a higher
temperature than the other temperature source.
Water Temp
calibration dialog box
