106
Settings
Data Source menu
Allows you to change the name and scope of a source and add/remove sources
from a NMEA 2000 or ethernet network. To access a Data Source menu, highlight
a desired source and press
MenU
.
Rename
Used to rename a Data Source. That makes it easier to recognize one
data source from another when they are the same type of source.
To Rename a data source:
Select
1.
Rename
from the desired data source menu
and press
enTeR
. A keyboard will appear.
Input the desired name and select
2.
OK
and press
enTeR
.
New
Allows you to create a new instance of a data source.
To create new data source instance:
Select
1.
New
from the desired source menu and press
enTeR
.
A key-
board will appear.
Input the name of the new instance, select
2.
OK
and press
enTeR
.
Remove
Removes an instance from the Data Source Selection list.
To remove an instance, select
Remove
from the desired data source menu and press
enTeR
. The data source is removed from the Data Source Select list.
Scope
Controls the way data source settings are shared/not shared on an ethernet network.
Scope lets you select a mode that allows data source settings to be shared by HDS
units on an ethernet network (Global).
You can also select a mode that allows each HDS unit to have individual data source
settings (Local).
Scope Settings
Global
Local
Data source settings will apply to all
HDS units on an ethernet network.
Data source setting will apply only
to the unit with the local setting.
Data Source
menu
