107
Settings
To select a scope:
Highlight
1.
Scope
on the selected device’s data source menu and
press
enTeR
.
Use the keypad to select
2.
Global
or
Local
and press
enTeR
.
Reset Global and Reset Local
Selecting Reset Global will reset all the source selections to default settings and
removes all instances on all networked HDS units.
Reset Local is used to change all source selections on your HDS unit from Local to
Global.
To reset global or local sources:
Highlight
1.
Resset Global
or
Reset Local
and press
enTeR.
A confirma
-
tion message will appear.
Select
2.
Yes
and press
enTeR.
Device List
Displays a list of devices connected to a NMEA 2000 network.
From the Device List you can:
View device data
•
Change the device instance
•
Configure device alarms
•
Configure devices
•
Calibrate devices
•
Enable/disable WAAS/EGNOS/MSAS for GPS antenna by configuring
•
HDS iGPS
To access the device list, Select
Device List
from the Network menu and press
enTeR
.
Device Menu
Controls the way data is displayed on the Device list. To
access the Device menu, highlight the desired device and press
MenU
.
Device List
