Lowrance GlobalMap Baja 480C Operation Instructions Manual Download Page 22 | Manualshive

Page: 22 / 140

background image

16

face on the GlobalMap Baja 480c and receive positioning information.
The GlobalMap Baja 480c can exchange information with any device
that transmits or receives NMEA 0183 data.

See the following diagram for general wiring connections. Read your
other product’s owner’s manual for more wiring information.

NMEA Wiring
(Data cable)

To exchange NMEA 0183, the GlobalMap Baja 480c has one NMEA
0183 version 2.0 communication port. Com port one (Com-1) can be
used to receive NMEA format GPS data. The com port can also trans-
mit NMEA format GPS data to another device.

The four wires for the com port are combined with the Power Supply
cable and NMEA-2000 Power cable to form the power/data cable
(shown earlier). Com-1 uses the yellow wire to transmit, the orange
wire to receive and the shield wire for signal ground. Your unit does not
use the blue wire.

Com-1 wiring to receive NMEA position information from some other

GPS receiver

Com-1 wiring to transmit NMEA position information

to another NMEA-compatible device.

Mounting the Unit: Bracket, In-Dash or Portable

You can install the GlobalMap Baja 480c on the top of a dash with the
supplied gimbal bracket. It can also be installed in the dash or mounted
on a portable power supply.

If you use the supplied bracket, you may be interested in the optional
R-A-M



bracket mounting system. This converts the unit's gimbal

bracket to a swivel mount, which can be used on the dash or overhead
mounting positions. Installation instructions are supplied with the
R-A-M mounting kits. R-A-M offers permanent mounts and temporary
mounts suitable for many vehicle types. See your Eagle dealer or visit
the LEI web site (

www.lei-extras.com

) for the latest options; accessory

Ground

To Other

Device

Com-1

To GlobalMap

Baja 480c

Yellow (Transmit)

NMEA Receive

Shield (Ground)

Orange (Receive)

NMEA Transmit

Shield (Ground)

Ground

Com-1

To GlobalMap

Baja 480c

To Other

GPS Receiver

«
...
20
21
22
23
24
...
»

Summary of Contents for GlobalMap Baja 480C













































































































































Reviews:

No comments

Related manuals for GlobalMap Baja 480C

Brand: Haicom Pages: 12

Brand: iDM Pages: 24

RoadMate Series

Brand: Magellan Pages: 14

RoadMate 1440 - Automotive GPS Receiver

Brand: Magellan Pages: 19

RoadMate 1200 - Automotive GPS Receiver

Brand: Magellan Pages: 31

RoadMate 1200 - Automotive GPS Receiver

Brand: Magellan Pages: 33

RoadMate 1200 - Automotive GPS Receiver

Brand: Magellan Pages: 8

GPSMAP 96 - Hiking

Brand: Garmin Pages: 150

Brand: Ubisense Pages: 7

Brand: Haicom Pages: 30

Brand: Camoplast Pages: 24

Brand: Garmin Pages: 78

REAL-TIME TRACKER HI-602

Brand: Haicom Pages: 21

Brand: B&G Pages: 42

Dimension4 UWB+BLE Tag

Brand: Ubisense Pages: 20

Brand: Eagle Pages: 36

Brand: Eagle Pages: 89

Mapping GPS & MP3 Player

Brand: Lowrance Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands