Lowrance GlobalMap Baja 480C Operation Instructions Manual Download Page 124

Page: 124 / 140

118

If you're looking

for nearest

, the unit says it is calculating, then a

list of waypoints appears. The closest is highlighted at the top of the
list and the farthest at the bottom of the list.

Calculating message (left) and list of the nearest waypoints (right).

4. To see location information on the closest (highlighted) waypoint,
press

ENT

and the Waypoint Information screen appears. (If you

wanted to, you could select another waypoint from the list with the

↑

↓

keys.)

To navigate

to the waypoint, press

ENT

. (The Go To Waypoint

command is already highlighted.) The unit will show navigation infor-
mation to the waypoint.

To find

the waypoint, press

↓

IND

ENT

. The Map Page

appears with the cursor highlighting the found waypoint.

Waypoint Information screens with the Go To Waypoint command se-

lected (left) and the Find on Map command selected (right).

Summary of Contents for GlobalMap Baja 480C












































































































































Search results

Summary of Contents for GlobalMap Baja 480C

Reviews:

Related manuals for GlobalMap Baja 480C

Brands by name

Popular brands

Lowrance GlobalMap Baja 480C, Operation Instructions Manual

Search results

Summary of Contents for GlobalMap Baja 480C

Reviews:

Related manuals for GlobalMap Baja 480C

Brands by name

Popular brands