Lowrance GlobalMap Baja 480C Operation Instructions Manual Download Page 101

Page: 101 / 140

System Setup menu (left) with Pop-up Help highlighted. Pop-up Help

message for Go To Cursor (right), located on the Map Menu.

Reset Options

To reset all features to their factory defaults:

1. Press

MENU

↓

YSTEM

ETUP

ENT

↓

ESET

PTIONS

ENT

←

ENT

NOTE:

Reset Options does

not

erase any waypoints, routes, icons or plot trails.

Reset Options command (left) and the Reset Options Menu (right).

Screen Contrast and Brightness

To access the Screen menu, press

MENU

ENT

Once in the Screen menu:

To adjust the display's contrast:

The

ONTRAST

slider bar is already selected. Press

→

←

to move the

bar. The left end of the scale is minimum contrast; the right end is
maximum contrast.

Summary of Contents for GlobalMap Baja 480C












































































































































Search results

Summary of Contents for GlobalMap Baja 480C

Reviews:

Related manuals for GlobalMap Baja 480C

Brands by name

Popular brands

Lowrance GlobalMap Baja 480C, Operation Instructions Manual

Search results

Summary of Contents for GlobalMap Baja 480C

Reviews:

Related manuals for GlobalMap Baja 480C

Brands by name

Popular brands