Lowrance GlobalMap 3500C Operation Instructions Manual Download Page 120

Page: 120 / 136

114

Calculating message, left, and list of the nearest waypoints, right.

4. To see location information on the closest (highlighted) waypoint,
press

ENT

and the Waypoint Information screen appears. (If you

wanted to, you could select another waypoint from the list with the

↑

↓

keys.)

To navigate

to the waypoint, press

ENT

. (The Go To Waypoint com-

mand is already highlighted.) The unit will show navigation informa-
tion to the waypoint.

To find

the waypoint, press

↓

IND

ENT

. The Map Page

appears with the cursor highlighting the found waypoint.

Waypoint Information screens with the Go To Waypoint command se-

lected, left, and the Find on Map command selected, right.

To clear these menus and return to the previous page, press

EXIT

re-

peatedly.

If you're looking

by name

, there are two options:

You can

spell

out

the name in the top selection box. Press

↑

↓

to change the first

Summary of Contents for GlobalMap 3500C








































































































































Search results

Summary of Contents for GlobalMap 3500C

Reviews:

Brands by name

Popular brands

Lowrance GlobalMap 3500C, Operation Instructions Manual

Search results

Summary of Contents for GlobalMap 3500C

Reviews:

Brands by name

Popular brands