background image

 11

NAVICO 

FULL ONE-YEAR WARRANTY 

"We," "our," or "us" refers to NAVICO, the manufacturer of this product. "You" or "your" 
refers to the first person who purchases this product as a consumer item for personal, 
family or household use. 

We warrant this product against defects or malfunctions in materials and workmanship, 
and against failure to conform to this product's written specifications, all for one (1) year 
from the date of original purchase by you. WE MAKE NO OTHER EXPRESS 
WARRANTY OR REPRESENTATION OF ANY KIND WHATSOEVER CONCERNING 
THIS PRODUCT. Your remedies under this warranty will be available so long as you can 
show in a reasonable manner that any defect or malfunction in materials or 
workmanship, or any non-conformity with the product's written specifications, occurred 
within one year from the date of your original purchase, which must be substantiated by 
a dated sales receipt or sales slip. Any such defect, malfunction, or non-conformity which 
occurs within one year from your original purchase date will either be repaired without 
charge or be replaced with a new product identical or reasonably equivalent to this 
product, at our option, within a reasonable time after our receipt of the product. If such 
defect, malfunction, or non-conformity remains after a reasonable number of attempts to 
repair by us, you may elect to obtain without charge a replacement of the product or a 
refund for the product. THIS REPAIR, OR REPLACEMENT OR REFUND (AS JUST 
DESCRIBED) IS THE EXCLUSIVE REMEDY AVAILABLE TO YOU AGAINST US FOR 
ANY DEFECT, MALFUNCTION, OR NON-CONFORMITY CONCERNING THE 
PRODUCT OR FOR ANY LOSS OR DAMAGE RESULTING FROM ANY OTHER 
CAUSE WHATSOEVER. WE WILL NOT UNDER ANY CIRCUMSTANCES BE LIABLE 
TO ANYONE FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR OTHER 
INDIRECT DAMAGE OF ANY KIND. 

Some states do not allow the exclusion or limitation of incidental or consequential 
damages, so the above limitations or exclusions may not apply to you. 

This warranty does NOT apply in the following circumstances: (1) when the product has 
been serviced or repaired by anyone other than us; (2) when the product has been 
connected, installed, combined, altered, adjusted, or handled in a manner other than 
according to the instructions furnished with the product; (3) when any serial number has 
been effaced, altered, or removed; or (4) when any defect, problem, loss, or damage has 
resulted from any accident, misuse, negligence, or carelessness, or from any failure to 
provide reasonable and necessary maintenance in accordance with the instructions of the 
owner's manual for the product. 

We reserve the right to make changes or improvements in our products from time to time 
without incurring the obligation to install such improvements or changes on equipment or 
items previously manufactured. 

This warranty gives you specific legal rights and you may also have other rights which 
may vary from state to state. 

REMINDER: You must retain the sales slip or sales receipt proving the date of your 
original purchase in case warranty service is ever required. 

NAVICO 

12000 E. SKELLY DRIVE, TULSA, OK 74128 

(800) 324-1356 

Summary of Contents for EP-DDS













Reviews: