background image

 2 

The EP-DDS consists of a NMEA 2000 style cable connector and a 

skimmer transducer that converts depth and temperature readings to 

NMEA 2000 data format. When the device is plugged into a network 

backbone, display units on the network will be able to display digital 

depth and water temperature data from the transducer. The cable 

length from the connector to the transducer is 15 feet. 

 

The NMEA 2000 style female to Lowrance blue female adapter cable 

allows users to add NMEA 2000 style connector devices to a Lowrance 

blue connector network.  

The EP-DDS, like the other Electronic Probe (EP) sensors, is designed 

for use with a NMEA 2000 network. Your sensor, however, is also 

compatible with Lowrance blue connector networks. It can be added to 

a Lowrance blue connector network by using a NMEA 2000 style 

female-to-Lowrance blue female adapter cable.  Your sensor 

MUST

 be 

connected to a NMEA 2000 network or it 

WILL NOT

 function. 

Tools and Supplies 

Your EP sensor packs with a T connector needed to attach it to a 

NMEA 2000 LowranceNet network. If this is the first sensor you are 

connecting, you may need to purchase a LowranceNET Node Kit. 
For complete instructions on setting up a new NMEA 2000 network or 

expanding an existing one, see the NMEA 2000 document packed with 
your EP-DDS, "

Setup and Installation of NMEA 2000 Networks, 

General Information

," part number 988-0154-173. If that document is 

not available, it can be downloaded free from the Lowrance web site. 

Connecting to a NMEA 2000 Network 

A NMEA 2000 network is a communications link between two or more 

devices that transfer NMEA 2000 information. LowranceNET is the 

NMEA 2000 networking system developed by Lowrance Electronics. A 

NMEA 2000 network functions like the phone wiring in a house. If, for 

example, you pick up a phone in the living room you will be able to 

hear the conversation someone is having on a phone in the bedroom.  
A NMEA 2000 network is similar in that it allows multiple display 

units to receive data from a GPS antenna, or multiple sonar units to 

receive messages sent by a temp sensor. It also allows you to view 

information like engine diagnostics and fuel level data on digital 

gauges and display units. 

Summary of Contents for EP-DDS













Reviews: