Lowrance ELITE Ti2, Installation Manual

Page: 33 / 56

given for the same model transducer, refer to paperwork supplied
with transducer to determine impedance.
Autopilot settings
Autopilot features will be enabled when a compatible trolling
motor is connected. No special setup is required. See the operator
manual for further details.
Fuel settings
The fuel utility monitors a vessel's fuel consumption. This
information is totaled to indicate trip and seasonal fuel usage, and is
used to calculate fuel economy for display on instrument pages and
the data bar.
To use the utility, a Navico Fuel Flow sensor, or a NMEA 2000 engine
adaptor cable/gateway with Navico Fuel Data Storage device must
be fitted to the vessel. The Navico Fuel Flow sensor, does not
require the use of a separate Fuel Storage device. Refer to the
engine manufacturer or dealer for information on whether or not
your engine provides a data output, and what adaptor is available to
connect to NMEA 2000.
Once the physical connection is made, ensure source selection is
completed. Multiple engine installations using Fuel Flow sensors, or
Fuel Data Storage devices, require setup of related engine location
in the Device list. For general source selection information, refer to
"Network settings"
on page 37.
Vessel setup
The Vessel setup dialog must be used to select the number of
engines, the number of tanks and vessel’s total fuel capacity across
all tanks.
Software setup | ELITE Ti² Installation Manual
33