14
2. Restore electrical power. Within 30 seconds of
restoring electrical power, press and hold the
button on the remote control transmitter for 5 seconds
or until fan beeps. Use the remote control transmitter
to test the light and fan functions to confirm the
learning process is complete.
IMPORTANT:
To prevent damage to remote control
transmitter, remove the battery if not used for long
periods. Store the remote control transmitter away
from excess heat or humidity.
2
Remote Control Transmitter
OPERATING INSTRUCTIONS
3.
3
Remote Control Transmitter
Operation buttons on the panel of the remote control
transmitter:
1
- Reverse function for winter & summer
2
- Fan speeds: 1 (lowest) to 6 (highest)
3
- To turn fan
ON
or
OFF
4
- Timer: Fan stops after 1h/4h/8h
5
- To turn light
ON
or
OFF
6
- Breeze: fan speeds automatic cycle
between 1 to 6 speeds.
7
- Vacation mode: switch on the light kit
5 minutes each 2 hours.
Tap button quickly to turn lights off or on. Hold
button down to increase or decrease lights. If you
press button in excess of 0.7 seconds, it becomes
a dimmer. The lights vary cyclically in 8 seconds. The
light button has an auto resume function, which keeps
the light at the same brightness as the last time it was
turned off.
CARE AND MAINTENANCE
At least twice each year, lower canopy (F) to check downrod (C) assembly, and then tighten all
screws on fan. Clean motor assembly (I) with only a soft brush or lint-free cloth to avoid scratching
the finish. Clean blades (J) with a lint-free cloth. You may occasionally apply a light coat of furniture
polish to wood blades for added protection.
IMPORTANT:
Shut off main power supply before beginning any maintenance. Do not use water or a
damp cloth to clean the ceiling fan.
Total wattage for this fan is 18 watts; do not attempt to replace the LEDs.
1
2
3
4
5
6
7
