12
M
FINAL INSTALLATION
2
Remote Control
Bracket
Wall
1.
Bracket
Screws
If mounting surface is drywall,
mark the
location of the holes using a pencil or a marker
(not included). Use a 7/32 in. drill bit (not
included) to drill two pilot holes in drywall at
marked locations.
Position plastic anchor in each pilot hole. Gently
tap plastic anchors with a hammer (not
included) until flush with wall surface. Screw
bracket screws into plastic anchor.
The remote control transmitter from remote
pack (N) rests inside the bracket.
If you wish to use the remote control bracket
from remote pack (N) on a wood surface, install
bracket screws from remote pack (N) through
bracket and into the desired installation site.
3.
1
Align slots on shade (M) with protrusions on
underside of motor assembly (I). Turn shade (M)
clockwise
until it no longer turns.
NOTE:
Pull down gently on the shade (M) to make
sure it is secured completely.
2.
3
Remote Control
Bracket
Wall
Bracket
Screws
Wall
Anchors
Slot
Protrusion
