4
Overview
EN
Key
1 Connection for diagnostic nasal
cannula
This is where the diagnostic nasal cannula is
connected to the device. Using the Luer lock
sealing cap supplied, you can seal the connection
for the diagnostic nasal cannula during the
hygiene treatment.
2 Button
You can use this button to switch on the device,
navigate through the menu and start a
measurement.
3 Connection for pulsoximetry sensor/
CARDIO-Sensor
This is where the pulsoximetry sensor is
connected.
4 Attachment for wristband
You can attach the pulsoximetry sensor or the
CARDIO-Sensor here.
5 Display
The display shows you the results of the recording
and current measured values.
6 Wristband
You can use the wristband to attach the device to
your patient’s forearm.
7 USB port
The USB port is for connecting the device to a PC.
8 Rubber cover
The rubber cover protects the USB port from
splashes.
9 Battery compartment
This is where batteries/rechargeable batteries are
inserted.
