background image

Lowell UPS9 Series Manual

Pg. 3

Thank you for selecting this uninterruptible power supply (UPS) . It provides you with protection for connected equipment . 
Please read this manual before installing model UPS9-1000, UPS9-1500, UPS9-2000, or UPS9-3000, as it provides important 
information that should be followed during installation and maintenance of the UPS and batteries, allowing you to correctly set 
up your system for maximum safety and performance . Included is information on customer support and service, if it is required . 
If you experience a problem with the UPS, refer to the Troubleshooting section in this manual to correct the problem . If the 
problem is not corrected, collect information so customer service representatives can more effectively assist you . 

IMPORTANT SAFETY INSTRUCTIONS:

 

(Save these instructions)

CAUTION! (UPS having Internal Batteries):  

Risk of electrical shock — Hazardous live parts inside this unit are energized 

from the battery supply even when the input AC power is disconnected . 

CAUTION! (No User serviceable Parts):

  Risk of electrical shock, do not remove cover . No user serviceable parts inside . 

Refer servicing to qualified service personnel . 

CAUTION! (Non-isolated Battery supply): 

 Risk of electric shock, battery circuit is not isolated from AC input, hazardous 

voltage may exist between battery terminals and ground . Test before touching . 

WARNING! (Fuses): 

 To reduce the risk of fire, replace only with the same type and size of fuse .

WARNING!  

Unit intended for installation in a controlled environment .

CAUTION!  

Do not dispose of batteries in a fire, the battery may explode . 

CAUTION!  

Do not open or mutilate the battery, released electrolyte is harmful to the skin and eyes . 

CAUTION!  

A battery can present a risk of electric shock and high short circuit current . The following precautions should be 

observed when working on batteries: 
  – Remove watches, rings and other metal objects .
  – Use tools with insulated handles . 

To reduce the risk of electric shock, disconnect the UPS from the main supply before installing a computer interface signal cable . 
Reconnect the power cord only after signaling interconnections have been made .

Servicing of batteries should be performed or supervised by personnel with knowledge of batteries and the required precautions . 
Keep unauthorized personnel away from batteries .

These UPS units are extremely heavy . Caution should be taken in moving and positioning equipment . 

The instructions contained within this safety manual are deemed important and should be closely followed at all times during 
installation and follow-up maintenance of the UPS and batteries . 

Summary of Contents for UPS9-1000











































Reviews: