Universal User Guide, Rev L, February 2022
32
Firmware version 1.0.124 and below
USB State
Operating Mode Green LED
Connected
Stopped
Off
Waiting for start
time
Off
Running
Blinks at the same rate as
the temperature interval
Red LED
The red LED indicates that there is a serious error, such as a failing battery or memory card error.
Depending on the type of error and the firmware version, the LED may be on continuously or may be
blinking, but either way, if the red LED is on the logger should be connected to a PC and the status
message in the Device tab should be checked to determine the cause of the error.
Power Applied/ Reset
When the power is applied or the board is reset, the logger blinks both red and green LEDs 4 times.
5.3
Presets
The Preset dropdown menu on the Setup tab contains five common deployment settings in Domino .
The temperature, accelerometer/magnetometer, start and stop time settings are automatically set.
