Assembly manual
C6S
Kit
3
Masking tape
We recommend avoiding cheap masking tape, which tends to break when applied under
tension. Lay out the rear panel and apply masking tape as shown.
Flip over the panel to expose the mitres. Carefully position sides, top and bottom panels. Press
the panels firmly along each join so that the masking tape on the other side adheres to the
MDF. Now rotate up each of the four panels as shown below and press the masking tape firmly
into the join.
Tip:
Overhang a small strip of masking tape on each of the four panels. These strips, which
are shown on the next page, will make it easy to lift the panels.
