Lotus PCIT-64ET, Installation And Operating Instructions Manual, Page: 21 / 27

INSTRUCTIONS FOR USE
Translation of the original instructions
21
Errors due to the digital control (only for appliances with digital control)
These are errors due to the digital control system and are signalled by the "E2" on the display followed by
the error number
TABLE OF ERRORS DUE TO THE DIGITAL CONTROL (E2)
ERROR NO. DESCRIPTION CAUSE CORRECTIVE ACTION
E2 3 Keypad permanently ON
1 - Water or pot in the cooking area
2 - Keys defective 1 - Clean the control area
2 -Replace the control unit
E2 5 LIN bus open No connection detected LIN bus control
E2 10
1 - Wiring interruption
2 - Defective ID
1 - Check the connection between the
keypad and the generator
2 - The control unit has a defective ID 1 - Make the connection correctly
2 - Turn off the generator, adjust the
DIP switch correctly
E2 11 Self-diagnostics error Self-diagnostics software
Turn the appliance off and back on, if
the problem persists contact
customer service
E2 13 Invalid configuration data
The device found invalid configuration
data
Contact customer service
E2 14 Power supply voltage
Keypad power supply voltage
problems
Automatic reset
E2 20 LIN version compatibility LIN version not compatible Contact customer service
E2 FF Unknown error Cause unknown Contact customer service