INSTRUCTIONS FOR USE
Translation of the original instructions
15
The generator does not accept unsuitable pots. Any other product not mentioned in this paragraph is to
be considered automatically excluded and unsuitable for the correct operation of the induction generators
4.3.2
Function checks
After all connections are made, check the functionality of the appliance:
·
Remove the pot from the cooking area
·
Adjust the cooking level to zero
·
Turn on the mains power supply
·
The green and red indicator lights must not turn on or flash
·
For appliances with an electronic control, the display must only show the cooking level 0
·
Increase the cooking level to the desired number
·
The green lamp must flash regularly each second (pot detection mode)
·
For appliances with electronic control, the pot detection symbol
must flash
·
There may not be any faults
·
The red indicator light must not turn on / For appliances with an electronic control, no error code must be
shown on the display
·
Place a specific induction pot that is filled with water in the cooking area. This pot diameter must be
minimum 12 cm
·
The green warning light or the display must be on continuously
·
Adjust to the maximum power
·
The fan must turn on after a few minutes
If an error occurs, refer to the "troubleshooting" paragraph
Caution
·
Do not heat empty pots if they are unsupervised
·
The pots must always be placed in the centre of an inductor area
·
The pots must not be heated above 300°C
4.3.3
Shut-off
·
Turn the switch/potentiometer clockwise or anticlockwise to the [OFF] position
·
Certain parts of the generator remain energised even when the stove is off. Therefore, when performing
maintenance, first disconnect the equipment from the mains
·
Make sure that no liquid arrives inside the induction generator during normal use or during cleaning or
maintenance of the component
