ILMAS10
ILMAS10
26
27
Note: The hour hand is not advanced rapidly even if the crown is continuously clicked
two or more times. Perform correction accurately 1 hour at a time. Furthermore, the
range of time difference correction is ±23 hours based on the current time.
4. Always make sure to return the crown to the normal position after correcting the
time difference.
The alarm function uses a 24-hour clock. Once the alarm has been set, the alarm
sounds for 15 seconds when the set time is reached once a day. The time at
which the alarm sounds applies to the time (TME) mode, and cannot be set based
on the local time (L-T).
Note: If the hour hand passes 12:00 AM (midnight) during correction, the date is
advanced by 1 day following completion of hand movement. If the time difference is
corrected in the counter-clockwise direction and the hour hand passes back over 12:00
AM, although the date is corrected following completion of hand movement, since the
date is corrected by 30 days in the clockwise direction, it takes about 2-3 minutes fo
the date to be corrected. Pay attention to AM and PM when correcting time difference.
Note: When returning the time difference to the original setting, return the hourhand
in the direction opposite that when the time difference was corrected.
8. USING THE ALARM
[Setting the Alarm Time]
1.
Turn the crown and set the mode hand to
the alarm [ALM] mode.
• Second hand: Moves rapidly to the ON
or OFF position.
• 24 hour hand, hour hand, minute hand:
Move the previously set alarm time.
• Function hand: Stops at the 0 position.
2.
Pull out the crown to Position 2 (alarm
setting position).
• The alarm setting is turned ON
automatically.
Summary of Contents for ILMAS10
Page 1: ......