©
2002 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
63-1126
OWNER’S MANUAL — Please read before using this equipment.
Thank you for purchasing the
RadioShack Keychain Stopwatch. This
handy device also includes a clock,
timer, alarm, wet compass and analog
thermometer.
5'66+0)
"
6*'
"
6+/'
"
#0&
"
'
1. From the time display, press
MODE
three times. The second digits and the
dash below the left
T
flash.
2. Press
START/STOP
, the second digits
reset to
&&
&&
&&
&&
.
3. Press
SPLIT/RESET
. The minutes digits
flash.
4. Repeatedly press or hold down
START/
STOP
until the desired minutes appear.
5. Press
SPLIT/RESET
. The hours digit(s)
flash.
6. Repeatedly press or hold down
START/
STOP
until the desired hour appears.
To choose between 12 and 24-hour
formats, repeatedly press
START/STOP
to advance the hour digit until the
desired format appears.
• If you are setting time based on a
12-hour format,
7777
or
FFFF
appears next
to the minutes when you set the time.
• If you are setting time based on a
24-hour format,
>>>>
appears next to the
minutes when you set the time. The
range is
&&&&
to
()
()
()
()
.
7. Press
SPLIT/RESET
.
:7J;
:7J;
:7J;
:7J;
appears with
the day digits flashing.
±
8. Repeatedly press or hold down
START/
STOP
until the correct day of the month
appears.
9. Press
SPLIT/RESET
. The month digits
flash.
10. Repeatedly press or hold down
START/
STOP
until the correct month appears.
11. Press
SPLIT/RESET
. The dash below the
currently set day of the week flashes.
±
12. Repeatedly press or hold down
START/
STOP
until the correct day of the week
appears.
13. Press
MODE
to return to the time
display.
5'66+0)
"
6*'
"
#.#4/
"
6+/'
The daily alarm sounds for one minute at the
preset alarm time.
1. From the time display, press
MODE
twice. The hour digits and the dash
below
M
flash.
2. Repeatedly press or hold down
START/
STOP
until the desired hour digits
appear.
3. Press
SPLIT/RESET
. The minute digits
flash.
4. Repeatedly press or hold down
START/
STOP
until the desired minutes digits
appear.
5. Press
MODE
to store the alarm setting
and return to the time display.
ýý
˜
appears when the alarm is set.
6. To view the alarm time from time
display, hold down
SPLIT/RESET
.
Release it to return to the time display.
6
740+0)
"
6*'
"
#
.#4/
"
1
0
"
#0&
"
1
((
1. From the time display, hold down
START/STOP
and
SPLIT/RESET
at the
same time. The watch beeps and the
alarm time appears.
2. Release
START/STOP
and
SPLIT/RESET
to return to the time display.
At the preset alarm time, the watch beeps
for about one minute. To silence the alarm
sooner, press
SPLIT/RESET
.
±
MODE
SPLIT / RESET
START / STOP
COMPASS
#
"
+/2146#06
"
#
If an icon appears at the end of a paragraph,
go to the box on that page with the
corresponding icon for pertinent information.
Rý
— Warning
#
— Important
.
.
.
.
— Caution
±
— Note
±
"
016'
"
±
"
Setting the Time and Date
• From time display, hold down START/STOP
to review the date. Release START/STOP to
return to the time display.
• You must manually set the date to February
29 in a leap year.
• If you need to set the date back a month, you
must first set the month to the desired
month, then set the date. For example, if the
calendar setting is now April 1 and you want
to set it back to March 31, you must first set
the month to
))))
(March), repeatedly press
SPLIT/RESET until the day digits flash, then
set the date to
)'
)'
)'
)'
. You can not set the date to
)'
)'
)'
)'
when the month is
****
(April) because there
are only 30 days in April.
• The day of the week may not be set during
the initial setting after a power loss. After
setting the time and date, cycle through the
steps again to this point to set the day of the
week.
Turning the Alarm On and Off
The snooze feature allows you to silence the
alarm temporarily. When the alarm sounds,
press START/STOP. The alarm is silenced
and sounds again after five minutes
-G[EJCKP
"
5VQRYCVEJ
YKVJ
"
%NQEM
."
6KOGT
."
9GV
"
%QORCUU
"
CPF
"
6JGTOQOGVGT
