Lotus ILMAS10, Instruction Manual, Page: 12 / 23

ILMAS10 ILMAS10
22
23
The chronograph is able to measure time up to a maximum of 59 minutes 59.95 seconds in
1/20th second units, after which it resets to 0 seconds.
[Explanation of Hands During Chronograph Measurement]
When the crown is turned and the mode hand is set to the chronograph [CHR] mode, the
second hand and function hand are rapidly advanced to the 0 position and the watch
enters the chronograph mode.
• Second hand: Switches to the chronograph second hand. The second hand
advances rapidly and makes one revolution only when starting at 0 seconds, after
which it moves in 1 second increments to measure chronograph seconds.
• Function hand: Switches to either chronograph minutes or chronograph 1/20th se-
conds. The function hand moves in one minute increments to measure chronograph
minutes. When button (B) is pressed when the chronograph is stopped, the function
hand switches to 1/20th seconds display during time button (B) is pressed.
Note: 24 hour hand, hour hand, minute hand, date wheel:
• Continue to display the current time when the watch has been switched from
the time/calendar mode.
• Continues to display local time when the watch has been switched from the
local time mode.
• Continues to display the alarm set time when the watch has been switched
from the alarm mode.
6. USING THE CHRONOGRAPH