INSTRUCTIONS FOR USE
Translation of the original instructions
12
5 INSTRUCTIONS FOR USE
5.1
General information
This appliance must only be used for its expressly intended purpose for cooking or heating food. Any other
use is considered improper. The appliance is also intended for industrial use and must only be used by
personnel trained for use and aware of the risks that the hot element entails.
Warning
The appliance operates at high temperatures, so the following is necessary:
·
Never switch the fryer on without oil in the tank
·
Pay attention to the areas surrounding the hot surface during routine normal operation
(danger of scalding);
·
RISK OF BURNS Do not touch hot surfaces floor with your hands or other parts of the body
to avoid burns caused by high temperatures;
·
After switching off the appliance, wait for a sufficient time for it to cool before carrying out
any cleaning or maintenance operation.
·
Fill the tank with oil up to the lower reference mark
5.2
Switching the pilot burner on
·
Set the knob to position 0, hold the button
pressed and at the same time operate the piezoelectric unit
several times until the pilot turns ON
·
· After switching ON, hold the button
pressed for a few seconds to allow the thermocouple to open the
gas circuit
Note
The flame might go out, in which case the procedure must be repeated.
5.3
Starting the main burner and adjusting the temperature
·
By turning the knob numbered 1 to 8, the gas flows to the main burner, which ignites. The 8 positions of
the thermostat meet the following temperatures: 1=120°C 2=130°C 3=140°C 4=150°C 5=160°C 6=170°C
7=180°C 8=190°C
5.4
Switching the appliance off
·
Turn the knob to position 0 to switch the main burners OFF. Now press the button
for a few seconds
and the pilot also switches OFF
