During a power outage, the water or seat heating temperature could appear to be lower than
the actual temperature setting.
Other energy saving tips
In order to save energy, please abide by the following instructions:
㻘
Keep seat cover closed when not in use to prevent heat from being lost.
㻘
Keep temperature set to low.
㻘
Unplug the power cord if you do not plan to use it for a long period of time.
㻘
㻘
When using the wash functions use
(front),
(back) buttons to adjust the nozzle to fit to your body.
LED level
Front
I
Back
Front
I
Back
17
16
<
Operation
(Instructions to operate each function)
Nozzle position adjustment
㻘
Before and after using For Wash / Lady Wash / Turbo,
the nozzle will automatically clean itself.
Automatic self cleaning nozzle
Cleaning the nozzle
t
Please perform the actions below without sitting on the toilet seat
t
On control panel press and hold the button for three(3) seconds and the nozzle will extend.
And nozzle stop during two minutes.
t
If nozzle tip pulls forward after rotating cloclwise nozzle tip, it is separated from nozzle.
t
To clean use a soft brush or a soft cloth
t
Assemble in the reverse order of when nozzole tip to replace a new nozzle tip or finished cleaning.
t
If push button, nozzle will retracked back to its original position and will perform it's self-cleaning function.
Separation of the nozzle
Assembly of the nozzle
㻘
When pressing the energy saver light on the electronic toilet seat will turn on.
㻘
Energy saver mode automatically maintains a water and seat temperature of 89.6.
㻘
If you want to turn off the energy saver function,
press the button again and the display light will turn off.
㻘
The energy saver function will automatically cancel when using the unit during a
power outage, and also after standing up from the seat.
Energy saver
t8IJMFVTJOH8BTI-BEZPS5VSCPQSFTTUIFTBNFCVUUPOBHBJOUPPTDJMMBUFOP[[MF
The nozzle will automatically move back and forth covering a wider area for washing.
t1SFTTCVUUPOBHBJOUPTUPQPTDJMMBUJPO
Oscillate
㻘
The ( ) display lamp for the Water pressure / Dryer will change when using the dryer function.
㻘
Adjust the dryer temperature by pressing
(Strong),
(Weak).
㻘
㻘
The drying functions can be adjusted up to 5 levels.
Warm air dryer adjustment
LED level
Strong
I
Weak
Strong
I
Weak
